Upgrade your 3-Axis to a 4-Axis CNC
Upgrade Includes:
- 4 axis GeckoDrives micro stepping.
Our controller comes with:
4 axis GeckoDrives micro stepping.
Mach3 Control Software.
Lots of built in features, some nobody one else has.
Closed loop feed back with Mach2. Estop on Mach 3 will stop the controler and the estop on the controller will stop Mach-3.
Built in filter circuits for AC.
Step and direction filtered and buffered for low voltage computers as well as noisy situations.
Lots of safety features. Main power switch is a 220vac breaker as well as switch.
Fuses on powers supply board.
Micro-computer monitors safety and shuts things down in an unsafe condition.
2 auxiliary Computer controller power outlets.
All auxiliary pins are connected to the back panel for easy hookup.
Built in pullups for extra pins and 5vdc and 12vdc for limits, probe, etc.
Temperature sensor monitors drive temperature (will never let your drives over heat) In the event of over temp.
Light on front panel starts to flash, micro-computer shuts down the controller and notifies Mach-3 to stop G-code.
Too many other great features to list.
- Z sensor to change tools easily
- Proximity switches to home machine
- Installation and Technical Support.
For more information and pricing contact Ernie at 770-262-4462 or by e-mail at ernie@cadforjewelry.com